The Blichmann Hopblocker is a new filter solution ultimately two filters in one. The hop blocker draws malt from the top down through a coarse filter, once the malt reaches a couple inches from the bottom of the kettle, lower the flow rate to around 1/3, then lift the shield to expose the fine filter in order to continue draining through the bottom. In the past, Blichmann has shown 95% of break material that was filter using the 20 gallon batches with 1 pound of hops. Awesome success!
The HopBlocker is recommended for use of the Blichmann's BoilerMaker Brew Kettles, but can be installed into any kettle.
Note: The HopBlocker is designed and intended for use with hop pellets only. Whole/loose hops will plug the HopBlocker. When combining the whole/pellet hops it is recommended to bag the whole hops when using this product.
Specs:
- Filters 95% break material
- Breaking new design is essentially two filters built into one
- Can be installed into any kettle
- Recommended for use of pellet hops
- Bag whole hops when using a combination