Evil Twin Roller Grain Mill

(No reviews yet) Write a Review

Thank you for your interest, but we are currently out of this product. Please call 325-356-5204 if you have any questions.

The Evil Twin roller mill with aluminum hopper can hold approximately 7lbs of grain and it features 5" x 1¼" twin knurled rollers! Achieve even and consistent crushes, enabling your grain to be ready for the best possible mash and sparge on your brew day.

It also has an adjustable gap at both ends which can be configured using the provided phillips screw calibration bolts. Out of the box, the gap is set at .039", but you have the freedom to adjust it between a .015" to .070" inch range. The premium machined steel rollers grab the grain kernels and pull them through the mill while the detachable hand-crank can be removed to install an electric drill, if you'd prefer. If you use a 3/8" drill at 500 rpm, it'll give you a crush rate of approx. 6lbs per minute!

This mill has a 12" tall hopper and it includes a 12" x 12" base board mount. This particle board mount is will conveniently fit snuggly on top of a 5 or 6 gallon plastic pail.

Some assembly is required, as you will need to bolt the hopper together along with attaching the mill to the base board with the included hardware.