Hardware

Oetiker Clamp Tool

This tool is for installing and removing Oetiker Clamps. Using Stepless Oetiker clamps will give you a superior connection on your beer and air hoses. you need these to properly attach Oetiker Clamps!

Crosses, Stainless Steel, Choose your size

Choose the size you need! These Crosses are stainless steel and work great for connecting either 3/16" or 1/4" beer lines (when connecting 3/16" heat line in hot water for 20 seconds) or 3/8" or 5/16" beer lines (when connecting 5/16" heat line in...

LineTees, Stainless Steel, Choose your size

Choose the size you need! These tees are stainless steel and come in two sizes: One works great for connecting either 3/16" or 1/4" beer lines (when connecting 3/16" heat line in hot water for 20 seconds) and the other works great for connecting...

Worm Clamps - Stainless Steel - Choose Your Size

Stainless Steel worm clamps, choose the size you need! Either choose the 1/8" to 9/16" Adjustable Clamp [LEFT in photo] (works best with 1/4" or 3/16"Beer line AND 5/16" gas line!). Or choose the 1/4" to 7/8" Adjustable Clamp [RIGHT in photo]. Easy to...

Swivel Nuts, Choose your size

Choose the size you need! 1/4" Flare to 1/4 Tubing (FFL to Barb) Swivel Nut is used to connect hose to 1/4 threaded FFL Cornelius Keg Connectors. Can be used for gas or liquid. Our 1/4" Flare to 5/16 Tubing (FFL to Barb) Swivel Nut is used to connect...

Counter Pressure Bottle Filler Deluxe Kit

This kit gives you everything you need to connect the bottle filler to a CO2 regulator and standard MFL Cornelius Connectors. Regulator hose is ready to connect to standard MFL disconnects. Many "kits" only give you the basic hoses for the keg side. This...

Foot for Keg Lids, Cornelius and Firestone Flat style, Single foot (not a pair)

This keg foot will fit the majority of keg lids. It fits all brand keg lids that we know of except AEB (See bullet points below) These should fit keg lids for both ball lock and pin lock kegs. It is impossible to know what every manufacture did for the...

Chrome Checkvalve with 1/4" Barb

This is a great Valve its simple in design cutting out multiple connections but causing the hindrance of not being able to remove off your system. We include teflon Tape so once you receive the valve it is ready for installation.

Brass Check valve , Taprite 1/4" MFL

Use this 1/4" MPT X 1/4" Brass MFL Shutoff Valve with a built in Check Valve on any of your equipment you need it on with its easy installation and the fact you recieve it with teflon tape already on it all you need to do is add it to your system...

1/4"MFL X 1/4" Left Hand MPT

1/4 Left Hand Thread NPT x 1/4 MFL (Flared) Nipple This nipple is for connecting a left hand thread primary regulator to an MFL connection. These are sometimes used when attaching to a high pressure hose or when you want to convert a primary into a...

Pluto Beverage Gun - Nylon

This Pluto Beverage gun is a great event or party faucet. It works especially well for non-carbonated beverages, but can be used for beer as well if you use enough beer hose for proper restriction. For a premium flow control event solution use our...

Duotight Push-In Fitting - 8 mm (5/16 in.) Elbow

This Duotight elbow is for 4mm ID X 8mm OD EVABarrier hose/tubing. This size is normally used for liquid, but is used for gas on Duotight inline regulators and some other Duotight products. Duotight fittings feature a dual oring design that...