CMBecker Add-A-Body Regulator Expansion Block for Primary & Secondary Systems

Expand Your Draft System Capacity with the CMBecker Add-A-Body Regulator Expansion Block

Efficiently manage your CO2 gas distribution and expand your draft beer system with the versatile CMBecker Add-A-Body Regulator Expansion Block. Designed for seamless integration with both primary and secondary CMBecker regulators, this essential component allows you to add additional gas lines or gauges, enhancing the functionality and flexibility of your existing setup. Perfect for brewers looking to serve multiple kegs from a single CO2 tank or monitor pressure more effectively.

Universal Compatibility & Robust Design

This high-quality add-a-body block is engineered to work not only with CMBecker primary and secondary regulators but also with many other right-hand thread regulators available on the market. Its robust construction ensures reliable performance and a secure connection for your gas lines.

Installation Instructions:

For Primary Regulators:

1. Remove High Pressure Gauge: Carefully unscrew and remove the high-pressure gauge from your existing primary regulator.
2. Install Add-A-Body: Screw the nipple of the CMBecker Add-A-Body into the port where the high-pressure gauge was located.
3. Reattach Gauge: Reinstall the high-pressure gauge onto the empty port on the opposite side of the Add-A-Body.
4. Seal & Test: Ensure all connections are secure. Use Teflon tape and/or pipe sealer on threads for an airtight seal. Thoroughly test all connections with soapy water to check for leaks before pressurizing your system.

For Secondary Regulators:

1. Remove Plug: Locate and remove the plug from the left high-pressure port on your existing secondary regulator.
2. Install Add-A-Body: Screw the CMBecker Add-A-Body directly into this newly exposed port.
3. Reattach Port/Gauge: Connect the previously removed port (or an additional gauge) into the remaining open hole on the opposite side of the Add-A-Body.
4. Seal & Test: As with primary regulators, apply Teflon tape and/or pipe sealer to all threads for a secure, leak-free connection. Always test with soapy water after installation to confirm there are no leaks.

Invest in the CMBecker Add-A-Body Regulator Expansion Block to effortlessly upgrade your draft system, providing the flexibility you need for multi-tap setups or advanced pressure monitoring.

Draft Equipment/Regulators/Primary CMBecker/Primary CO2 Regulator;Draft Equipment/Regulators/Primary CMBecker/Primary Nitrogen Regulator;Draft Equipment/Regulators/Secondary CMBecker
CMB Add a body Regulator, for expanding primary or secondary CMB Regulator