3/16" ID X 7/16" OD Beer Line Hose. American Made, dual durometer (dual layered), tasteless and odorless hose for superior beer dispensing. 3/16" hose gives you the proper restriction for beer dispensing without the foam. 5' of this hose is recommended per beer line. Some people use more for line to compensate for temperature or other restriction issues. This is commercial quality, American Made hose. This hose is twice the thickness of some hoses offered by other companies. Sold by the foot.
I used for bottling from a keg. Worked perfect. I have been using a Blichmann beer gun with 10 feet, reducing the pressure during bottling. I'd had some issues in maintaining carbonation, I read on a forum to use 30 feet hose and leave pressure the same, worked great.
Very good beer line hose. Stays relatively flexible, even in the kegerator. I detected no odor or off tastes, even when brand new. Best to heat the end in very hot water to make putting onto barbs easier. Highly recommend.
Have used this hose before and found it to be very good quality. Time to replace the hose in the kegerator so got this. Very fast shipping.
order arrived in two days and the 10ft lines resolved my foaming issue
I was having a foaming issue from my newly built Keezer.. longer lines were the suggestion.
Finding the parts needed on this site was fast and easy, order went through with no issues and arrived in just a few days to my mailbox.
Correct parts, ordered with ease, fast service, will order again here when the time comes.
