Brass Hardware and Fittings

1/4"MFL X 1/4" Left Hand MPT

1/4 Left Hand Thread NPT x 1/4 MFL (Flared) Nipple This nipple is for connecting a left hand thread primary regulator to an MFL connection. These are sometimes used when attaching to a high pressure hose or when you want to convert a primary into a...

Tap Handle Insert for Making Your Own Tap Handle or Beer Tap Handle Repair!

This brass insert allows you to make your own tap handle out of almost anything!  Simply Drill a whole slightly smaller than the outside thread and screw in the insert. These also work well for repairing existing tap handles   The threads...

Brass Barbed Nipples

Brass Barbed Nipples Choose between 3 different brass barbed nipples for both inlet and outlet use on draft beer equipment. We have 1/4", 5/16" and 3/8" barbs available The other side of these barbs is 1/4" MPT (Male Pipe Thread) which is used on...

1/4" MFL Nipple x 1/4" MPT

Our 1/4" MFL Nipple x 1/4 MPT adapter has a 1/4" MFL (right-hand male flare thread) to 1/4" MPT (right-hand male pipe thread) which enables you to attach a 1/4" swivel nut or or 1/4" FFL (female flare thread). This can work as in input on a...

Nitrogen Regulator Nipple and Nut

This is a nitrogen Nipple and Nut.  It is CGA580 style for a Nitrogen Regulator.  You can order this with a left hand thread or a right hand thread.  You need to know if you regulator is left or right hand thread.  For example,...

Plug, 1/4" MPT (Male Pipe Thread)

This 1/4" MPT (Male Pipe Thread) plug is great to use on any brass or aluminum port to seal air flow.  We use the on our regulators and air distributors.  When using with aluminum we find you sometimes need Teflon tape and  a pipe thread...

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...

1/4x1/4 Nipple, 2 1/2" Long

This 2 1/2" nipple is 1/4" X 1/4" NPT right hand thread (National Pipe Thread) and is used for connecting regulator bodies together. These nipples are thick, with wrench flats for easy installation and durability.  We use them for secondary Taprite,...

Nipple 1/4" MPT X 1/4 MPT

This nipple is 1/4" MPT X 17" MPT (Male Pipe Thread).  This is often used to attach two air manifolds together or for other applications where you need to join two Female 1/4 FPT parts together.  It is one inch long.   Important...

Nipple Left hand thread X Left hand threads, Hex 1 7/8" Long

Hex Nipple 2" long, Left hand threads on both sides. Used to join Taprite Regulator Bodies together. WARNING: This product can expose you to lead,  which is known to the state of California to cause cancer, birth defects and other...

1/4" MPT X 1/4" MPT Coupler

This brass coupler is 1/4" Female Pipe Thread (FPT) x 1/4" FPT  They can be used to put together any 1/4" Male Pipe Thread (MPT) fitting of brass, plastic or Stainless Steel.     Important information regarding Prop. 65 for California...

TEE, Brass 1/4"X1/4" Female Flaired (FFL)

This T is 1/4" FFL on all three sides.  Perfect for joining three MFL fittings Important information regarding Prop. 65 for California residents, click here.