Parts for Shanks

90 Degree Tailpiece 1/4" SS - Fits 3/16" or 1/4" Hose

90 DEGREE TAILPIECE 1/4"

Shank, Beer Line Connection Kit

This kit will allow for 3/16 beer line installation on a standard Shank, kit includes: Tailpiece, Washer, Shank Nut and Stainless Worm clamp. We also offer this kit with an upgrade to a stainless steel tailpiece. This would normally be used with a...

Shank Parts List

Type a description for this product here... WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

Hole Saw 15/16 for Installing Beer Shanks

This 15/16 hole saw is the perfect tool to drill out holes for beer shanks.  This gives a air tight fit than a 1" hole saw, but still allows shank to slide in freely.    Need to install beer shanks in a fridge?  Click here to view...

Hex Nut, Beer

This nut is used for attaching tailpieces to beer shanks and/or couplers (taps) WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go...

Winged Nut, Beer

This nut is used for attaching tailpieces to beer shanks and/or couplers (taps). Winged for easy screwing and unscrewing.     WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth...

Tailpiece, 3/16" - Fits 3/16" or 1/4" Hose

This tailpiece is commonly used to attach either 3/16" or 1/4" hose to a shank or coupler (Tap) WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more...

Beer Washer / Shank tailpiece Washer

This is the washer for a tailpiece. It fits between the tailpiece and the beer nut when you are attaching to a shank or coupler WARNING: This product can expose you to BPA, which is known to the state of California to cause cancer, birth defects and...

CMB 4mm (5/16"), fits 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16". Works perfect with the popular CMBecker Inline Flow Control! Stainless steel nipple, only...

CMB 4mm (5/16"), 90° elbow, fits 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 4mm Barb with a 90° elbow is necessary for those looking to use tubing that has an inner diameter of 3/16". Works perfect with the popular CMBecker Inline Flow Control! Stainless...

CMB 6mm (17/64"), fits 1/4" or 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 6mm Barb is necessary for those looking to use tubing that has an inner diameter of 1/4" or 3/16". It's slightly larger than 1/4" but will work - make sure you clamp it properly to get a good...

CMB 6mm (17/64"), 90° elbow, fits 1/4" or 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 6mm Barb with a 90° elbow is necessary for those looking to use tubing that has an inner diameter of 1/4" or 3/16". It's slightly larger than 1/4" but will work - make sure you clamp it...