Parts and Accessories

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

3' High Pressure Hose Assembly with CGA580 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,  One side connects directly to the tank, the other side has female FFL to connect to male 1/4' MFL.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/4" FFL with 1/4" MPT, Set up for Left Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for LEFT Hand Threaded Regulators   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

Regulator Gauge 0-160, Right Hand Thread...Not 60, but 160!

This is a 0-160 PSI gauge, not to be confused with the more common 0-60 gauge. This gauge is often used in Soda or carbonated water. It can also be used on the high pressure side of a secondary regulator when you are trying to watch for drop on a supply...

0-30 PSI Gauge

This is a high quality 0-30 PSI pressure gauge. These are compatible with most major name brand regulators, including Taprite.

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

Replacement Taprite Bonnet Assembly

With this Taprite regulator bonnet assembly you can replace your worn down or broken bonnets & knobs on Taprite Series 740hp and Taprite Series 5700hp primary regulators. This bonnet assembly is made from polycarbonate. Including the housing and...

Flat Seal for Taprite CO2 Regulator Tank Fitting

Over time, Taprite CO2 regulator fittings can become worn at the seals. This flat seal will fit your Taprite regulator and will fix your pesky leak on your system. Simply use a 5/32” Allen wrench to remove the brass plug at the end of the...

Shutoff with Check Valve

This is a 1/4" MPT X 1/4" MFL Shutoff Valve with a built in Check Valve. Choose your barb Size!  Purchase as MFL or we can add a 1/4" or 5/16"        Swivel nut Barb that will connect directly to your hose. Solid Brass...

Chrome Checkvalve with 1/4" Barb

This is a great Valve its simple in design cutting out multiple connections but causing the hindrance of not being able to remove off your system. We include teflon Tape so once you receive the valve it is ready for installation.

Brass Check valve , Taprite 1/4" MFL

Use this 1/4" MPT X 1/4" Brass MFL Shutoff Valve with a built in Check Valve on any of your equipment you need it on with its easy installation and the fact you recieve it with teflon tape already on it all you need to do is add it to your system...

Regulator Gauge, 0-60

This gauge reads from 0 to 60 pound. It a replacement regulator gauge for reading the pressure of your keg. Right hand thread. This will fit any beer regulator on the market. They are all right hand thread on the low pressure side. WARNING: This...