CO2 and Nitrogen Wrench - Metal

This CO2 regulator Wrench is used to attach your regulator to your CO2 and Nitrogen tank. It is designed to stay on the tank/regulator after attaching (it comes off the nut and hangs on the nipple) so you don't misplace it. This wrench fits both...

Gas Cylinder Safety Wall Bracket

Gas Cylinder Safety Wall Bracket securely fastens a 5 pound to 10 Pound CO2 or Nitro Cylinder to the wall, eliminates loose Cylinder hazards and increases valuable floor space in your home. Low-cost, enameled steel brackets with adjustable chain...

Faucet Wrench

This wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank. It is Made in the USA! Metal  WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6), ...

Faucet Wrench and Beer Tower Tool, Deluxe

This wrench allows easy removal and replacement of your faucet from a tower system or standard beer shank. The other sides allows for removal of nut on shank inside tower and most beer nuts for fridge kits and other applications where beer nut is used...

Standard Faucets Parts

Here is our complete parts list for Taprite faucets AND these fit standard faucets too (such as Krome brand)! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any...

Stout Faucet Parts

With us you are able to order any Part for our SS stout faucet you need. Some parts are special order and my take up to a week to get in these parts include: #1 Stop nut #2 Lever #8 Piston #9 Piston Set Screw "Dowel...

Perlick 600 Parts

Parts List for Perlick 600 Series Faucets WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6),  which is known to the state of California to cause cancer, birth defects and other reproductive...

Perlick 525 Parts

Here is our complete parts list for Perlick's 525ss Forward Sealing Faucets! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any questions!#2 - O-ring, top of...

Regulator Guage Boot

These are regulator gauge boot(s)for a Taprite regulator. You will need to order two for a two gauge regulator (or more for multiple gauge regulators. These really help protect your regulator, but not as well as the cage. People with 3 or more gauges...

A Taprite Regulator repair rebuild kit

This is a Taprite Rebuild kit for 740 series regulator.  It includes the diaphragm, cartridge and thrust washer.  This kit fits both old and new 740 regulators with metal or plastic bonnets.  In the past Taprite made a kit for old bodies...

Regulator Washer

Regulator washer (NYLON) for use between CO2 cylinder and regulator. These are used on all of our in house (Chudnow) regulators and on TOF Regulators, however, you do not need to (want to) use this washer on a Taprite regulator because they have a built...

Elbows

These are stainless steel elbows.  A plain elbow has a female connection on both ends, while a street elbow has a male connection on one end and a female on the other.