Draft Party Faucet, with 5 foot Line

This Party Faucet has 5' of 3/16 line attached and can be attached to a 1/4" or 3/16" barb connection with the use of a clamp. WARNING: This product can expose you to BPA, which is known to the state of California to cause cancer, birth...

Seal & Gasket Kit for Intertap Beer Faucets

This kit is a contains replacement gaskets and o-rings for the Intertap SS and PC faucets This kit will NOT work with Intertap FC faucets or NukaTap faucets.

CMB 4mm (5/16"), fits 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16". Works perfect with the popular CMBecker Inline Flow Control! Stainless steel nipple, only...

1 Faucet Tower Upgrade/Replacement Kit

With this you can replace your old lines in that sketchy looking tower you bought at that yard sale, or maybe its been a few years that you have owned your tower. This also gives you the chance to make those upgrades to your tower you needed to do...

Beer Faucet, Chrome, Cornelius Ball Lock Disconnect Attached

Beer Faucet, Chrome with coupler,adapter and Ball Lock Disconnect attached! This allows you to connect Faucet directly to a Cornelius Keg Connector (the liquid disconnect that attaches to the post of the keg) NOTE: Handle is not included. For...

Homebrew Disconnect Adapter Set

Use this set to attach a beer faucet directly to a homebrew keg disconnect. This allows you to connect a metel faucet directly to a homebrew keg! Connect the large end directly to your faucet and the small end to an MFL homebrew disconnect...

Beer Faucet, Chrome, Cornelius Connector Ready! Adapter Attached

Beer Faucet, Chrome with coupler and adapter for a 1/4" FFL Connector. This allows you to connect Faucet directly to a Cornelius Keg Connector (the liquid disconnect that attaches to the post of the keg) NOTE: Handle is not included. For illustration...

CMB 4mm (5/16"), 90° elbow, fits 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 4mm Barb with a 90° elbow is necessary for those looking to use tubing that has an inner diameter of 3/16". Works perfect with the popular CMBecker Inline Flow Control! Stainless...

Pin Lock Disconnect Liquid 1/2" MFL

  WARNING: This product can expose you to Chromium,  which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

Air Lock, Three Piece

Our favorate air lock, simple yet effective.  Never had one fail (oh boy, Murphys law won't like that statement)

CMB 6mm (17/64"), fits 1/4" or 3/16" ID Hose, Includes Beer Nut

The CMBecker International Inline Flow Control 6mm Barb is necessary for those looking to use tubing that has an inner diameter of 1/4" or 3/16". It's slightly larger than 1/4" but will work - make sure you clamp it properly to get a good...

Pin Lock Disconnect Gas 1/2" MFL

  WARNING: This product can expose you to Chromium,  which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.