The GovReg® Inline Secondary Pressure Regulator will greatly minimize install time and wasted beer, ensuring an ideal pour every time! Since it requires the adjuster tool, you can set the desired pressure once and not worry about changing pressures or people messing with your set pressure. You will need to adjust these regulators using an adjustment tool or we can preset them to your desired pressure. Just be sure to add this to the order notes AND email us at help@kegconnection.com and copy shipping@kegconnection.com. We can adjust the pressure from between 4 PSI and 55 PSI. If you want the ability to adjust your own you can purchase the GovReg® Adjusting tool. This will allow you to set the initial pressure and change pressure in the future.
- Allows pressures between 4PSI and 55PSI
- Works great for both direct draw (kegerators, fridges and keezers) and long draw systems
- Can be used with beer, soda, carbonated water, wine, coffee, Kombucha and other beverages
- We can preset PSI for you upon request, see info above.
Check out these great videos for more information about how and where to use GovReg® secondary regulators:
Adjusting the GovReg® Inline Secondary Regulator | How To Video (Click Here)
Converting My Keezer Using GovReg® Secondary Regulators | DIY Project (Click Here)
The GovReg® Secondary Regulator | Product Showcase (Click Here)
WARNING: This product can expose you to Lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
