Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets. This can be used for CO2 distribution on a regulator. We add Teflon tape to the threads so you can get a good seal when installing.
Important information regarding Prop. 65 for California residents, click here.
WARNING: This product can expose you to lead, which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Quick shipping
Installed this on my manifold so I could carbonate two kegs off tap. So far is working great
This is the part for an inexpensive upgrade from one keg to two kegs. With a new keg, one new CO2 line and new tap, you can upgrade from one keg to two kegs. One of the output female threads from the WYE was very difficult to screw in the male threads from a CO2 line. I don't know of this was a result of low quality threads on the WYE or the threads on the CO2 line. Using a vise, pliers and elbow grease, I managed to screw it in enough to make a leak free seal. Hopefully this is an abnormal issue.
