Inline Checkvalve

In-line checkvalve. This checkvalve will allow air to flow from the inlet to the outlet. Inlet is 1/4" MFL. Outlet is 1/4" FFL.      WARNING: This product can expose you to Chromium,  which is known to the state of...

Faucet Angler

This beer faucet handle angler allows you to angle your faucet handle slightly to allow it to fit into tighter spaces.  This is often used when your longer faucet handles are hitting the wall when pushing back to draft a beer.  It is...

5 LB CO2 Cylinder, Aluminum

    5 LB Aluminum CO2 Cylinder, New Size is: 17 3/4" x 5 1/2  Made in the USA! Shipped empty as required by law. We recommend that you use a Gas Cylinder Safety Wall Bracket. This protects from accidentally knocking down the CO2...

20oz CO2 Bottle, with Pin Valve, Black. Worthington Pro Grade, Made in the USA with USA made valve.

This is a standard Pin Valve CO2 bottle. This is the bottle we use on our pin valve kits.  These Cylinders are made in the United States and the manufacture states "Every cylinder that leaves that facility is cleaned for medical use, so these...

CMB CO2 and Nitrogen Wrench, Made in Germany - Plastic

 This CO2 and Nitrogen wrench is the very well made and is affordable enough that you can leave it on the regulator and never have to hunt for a wrench to remove and replace your CO2 and Nitrogen cylinder again. Made in Germany of a very high...

CO2 and Nitrogen Wrench - Metal

This CO2 regulator Wrench is used to attach your regulator to your CO2 and Nitrogen tank. It is designed to stay on the tank/regulator after attaching (it comes off the nut and hangs on the nipple) so you don't misplace it. This wrench fits both...

High Pressure Hose, Left Hand Thread

For use to connect any secondary or primary regulator to the CO2 cylinder LEFT HAND THREAD   For any questions please email help@kegconnection.com or call 325-356-5204! Sleeve protected ends, Rated to 2750 PSI Nipple for CGA320 Valve with...

Gas Cylinder Safety Wall Bracket

Gas Cylinder Safety Wall Bracket securely fastens a 5 pound to 10 Pound CO2 or Nitro Cylinder to the wall, eliminates loose Cylinder hazards and increases valuable floor space in your home. Low-cost, enameled steel brackets with adjustable chain...

Faucet Plug Brush

These fit great on standard beer faucets.  (***Note to Perlick faucet owners.  I use these on my Perlick Faucets as well, but you have to modify them slightly because the hole is much smaller.  What I do it take a box knife and just trip...

Faucet Wrench

This wrench allows easy removal and replacement of your faucet from a tower system or refrigerator shank. It is Made in the USA! Metal  WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6), ...

Faucet Wrench and Beer Tower Tool, Deluxe

This wrench allows easy removal and replacement of your faucet from a tower system or standard beer shank. The other sides allows for removal of nut on shank inside tower and most beer nuts for fridge kits and other applications where beer nut is used...

Standard Faucets Parts

Here is our complete parts list for Taprite faucets AND these fit standard faucets too (such as Krome brand)! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any...