A Taprite Regulator repair rebuild kit

This is a Taprite Rebuild kit for 740 series regulator.  It includes the diaphragm, cartridge and thrust washer.  This kit fits both old and new 740 regulators with metal or plastic bonnets.  In the past Taprite made a kit for old bodies...

Regulator Washer

Regulator washer (NYLON) for use between CO2 cylinder and regulator. These are used on all of our in house (Chudnow) regulators and on TOF Regulators, however, you do not need to (want to) use this washer on a Taprite regulator because they have a built...

Elbows

These are stainless steel elbows.  A plain elbow has a female connection on both ends, while a street elbow has a male connection on one end and a female on the other.

1/2" Tee 1/2" MPT

This is the perfect fittings to get from 1 fitting to 2 ends of your system. Set up in 3 holes using 1/2" MPT

Quick Disconnects

Attach these to your kettles, hoses and fermenters to swap between set-ups quickly and efficiently.

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...

Nipple Left hand thread X Left hand threads, Hex 1 7/8" Long

Hex Nipple 2" long, Left hand threads on both sides. Used to join Taprite Regulator Bodies together. WARNING: This product can expose you to lead,  which is known to the state of California to cause cancer, birth defects and other...

CO2 Regulator to Nitrogen Tank Adapter

Convert your CO2 Regulator to work with a Nitrogen tank. Why buy a separate regulator when you can switch back use you CO2 regulator for both? CO2 Regulator to Nitrogen Tank Adapter  Allows you to use CO2 regulator with Nitrogen Cylinder...