1/2" Tee 1/2" MPT

This is the perfect fittings to get from 1 fitting to 2 ends of your system. Set up in 3 holes using 1/2" MPT

1/2"Cross, 1/2" MPT

Type a description for this product here...

Quick Disconnects

Attach these to your kettles, hoses and fermenters to swap between set-ups quickly and efficiently.

TRI-CLAMP CAP

Have a hole on your fermentor or kettle that you no longer need use this and our clamps to cover it up!

1/4" MPT Adapter Plug for Cornelius Keg

This plug allows you to remove a post from either the gas or liquid side of a Cornelius brand keg and replace the post with this adapter. These are often used for window tinting or spraying with a keg when you need a universal thread to work with...

Brass Barbed Nipples

Brass Barbed Nipples Choose between 3 different brass barbed nipples for both inlet and outlet use on draft beer equipment. We have 1/4", 5/16" and 3/8" barbs available The other side of these barbs is 1/4" MPT (Male Pipe Thread) which is used on...

1/4" MFL Nipple x 1/4" MPT

Our 1/4" MFL Nipple x 1/4 MPT adapter has a 1/4" MFL (right-hand male flare thread) to 1/4" MPT (right-hand male pipe thread) which enables you to attach a 1/4" swivel nut or or 1/4" FFL (female flare thread). This can work as in input on a...

CO2 CGA 320 Nut, Nipple and Washer

These parts are for connecting a beer or soda regulator to a CO2 Cylinder.  The nut in this section is for CGA320 valve, which is the standard valve for CO2 cylinders in the USA and many other countries.  The nipple comes with Teflon tape...

Taprite CGA320 Nipple with built in CO2 Cylinder Washer, Left Hand Thread

This nipple fits on Taprite and other left hand thread nipples. This is a Taprite brand, direct replacement and includes a new tank seal. You can also purchase a new nut, Click Here for a direct link. This is made of brass and the thread is left hand...

Nitrogen Regulator Nipple and Nut

This is a nitrogen Nipple and Nut.  It is CGA580 style for a Nitrogen Regulator.  You can order this with a left hand thread or a right hand thread.  You need to know if you regulator is left or right hand thread.  For example,...

Plug, 1/4" MPT (Male Pipe Thread)

This 1/4" MPT (Male Pipe Thread) plug is great to use on any brass or aluminum port to seal air flow.  We use the on our regulators and air distributors.  When using with aluminum we find you sometimes need Teflon tape and  a pipe thread...

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...