Duotight Push-In Fitting - 9.5 mm (3/8 in.) x Female Beer Thread

(No reviews yet) Write a Review

This fitting allows you to connect to a standard beer shank or beer coupler. The 9.5mm size would normally be used with gas, however it can be used with Flow Control faucets like CMBecker when less restriction is desired. This can be used in your Keezer or fridge conversion.

Duotight fittings feature a dual oring design that give  you a better, more reliable seal.

Keep the following in mind when using Duotight fittings:

  • You need to cut your hose straight (not at an angle) and firmly push the hose into the fitting until it locks in place.
  • If you need to remove the hose, but pull back on the collet. 
  • Can be used with liquid or gas. Made from acetal plastic and the orings are made from EPDM, which is chemical resistant.
  • Do not use with chlorinated cleaning solutions including bleach. This will degrade the plastic. 
  • No clamps are used. The hose is clamped internally by the collet and orings.
  • Temperature rated to boiling (212) and pressure rated to 150PSI.