Hardware

Plastic Post Insert

****NOTE, MUST BE FITTED!!! This part rarely fits as it comes due to variations in construction over the years. They are normally too tall. We have to fit them to the keg we are replacing them on and you will need to do this as well. We sand them down...

Regulator Washer

Regulator washer (NYLON) for use between CO2 cylinder and regulator. These are used on all of our in house (Chudnow) regulators and on TOF Regulators, however, you do not need to (want to) use this washer on a Taprite regulator because they have a built...

Brass Barbed Nipples

Brass Barbed Nipples Choose between 3 different brass barbed nipples for both inlet and outlet use on draft beer equipment. We have 1/4", 5/16" and 3/8" barbs available The other side of these barbs is 1/4" MPT (Male Pipe Thread) which is used on...

1/4" MFL Nipple x 1/4" MPT

Our 1/4" MFL Nipple x 1/4 MPT adapter has a 1/4" MFL (right-hand male flare thread) to 1/4" MPT (right-hand male pipe thread) which enables you to attach a 1/4" swivel nut or or 1/4" FFL (female flare thread). This can work as in input on a...

CO2 CGA 320 Nut, Nipple and Washer

These parts are for connecting a beer or soda regulator to a CO2 Cylinder.  The nut in this section is for CGA320 valve, which is the standard valve for CO2 cylinders in the USA and many other countries.  The nipple comes with Teflon tape...

Taprite CGA320 Nipple with built in CO2 Cylinder Washer, Left Hand Thread

This nipple fits on Taprite and other left hand thread nipples. This is a Taprite brand, direct replacement and includes a new tank seal. You can also purchase a new nut, Click Here for a direct link. This is made of brass and the thread is left hand...

Nitrogen Regulator Nipple and Nut

This is a nitrogen Nipple and Nut.  It is CGA580 style for a Nitrogen Regulator.  You can order this with a left hand thread or a right hand thread.  You need to know if you regulator is left or right hand thread.  For example,...

Plug, 1/4" MPT (Male Pipe Thread)

This 1/4" MPT (Male Pipe Thread) plug is great to use on any brass or aluminum port to seal air flow.  We use the on our regulators and air distributors.  When using with aluminum we find you sometimes need Teflon tape and  a pipe thread...

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...

1/4x1/4 Nipple, 2 1/2" Long

This 2 1/2" nipple is 1/4" X 1/4" NPT right hand thread (National Pipe Thread) and is used for connecting regulator bodies together. These nipples are thick, with wrench flats for easy installation and durability.  We use them for secondary Taprite,...

Nipple 1/4" MPT X 1/4 MPT

This nipple is 1/4" MPT X 17" MPT (Male Pipe Thread).  This is often used to attach two air manifolds together or for other applications where you need to join two Female 1/4 FPT parts together.  It is one inch long.   Important...

Nipple Left hand thread X Left hand threads, Hex 1 7/8" Long

Hex Nipple 2" long, Left hand threads on both sides. Used to join Taprite Regulator Bodies together. WARNING: This product can expose you to lead,  which is known to the state of California to cause cancer, birth defects and other...