Standard Faucets Parts

Here is our complete parts list for Taprite faucets AND these fit standard faucets too (such as Krome brand)! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any...

Stout Faucet Parts

With us you are able to order any Part for our SS stout faucet you need. Some parts are special order and my take up to a week to get in these parts include: #1 Stop nut #2 Lever #8 Piston #9 Piston Set Screw "Dowel...

Perlick 600 Parts

Parts List for Perlick 600 Series Faucets WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6),  which is known to the state of California to cause cancer, birth defects and other reproductive...

Perlick 525 Parts

Here is our complete parts list for Perlick's 525ss Forward Sealing Faucets! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any questions!#2 - O-ring, top of...

Regulator Guage Boot

These are regulator gauge boot(s)for a Taprite regulator. You will need to order two for a two gauge regulator (or more for multiple gauge regulators. These really help protect your regulator, but not as well as the cage. People with 3 or more gauges...

Regulator Guage Cage

This regulator guage cage is heavy guage metal with a black powder coat finish and comes with a bolt to attach it to your Taprite regulator. This will only fit a taprite regulator. Provides extremely good protection for the...

A Taprite Regulator repair rebuild kit

This is a Taprite Rebuild kit for 740 series regulator.  It includes the diaphragm, cartridge and thrust washer.  This kit fits both old and new 740 regulators with metal or plastic bonnets.  In the past Taprite made a kit for old bodies...

Regulator Washer

Regulator washer (NYLON) for use between CO2 cylinder and regulator. These are used on all of our in house (Chudnow) regulators and on TOF Regulators, however, you do not need to (want to) use this washer on a Taprite regulator because they have a built...

Elbows

These are stainless steel elbows.  A plain elbow has a female connection on both ends, while a street elbow has a male connection on one end and a female on the other.

1/2" Tee 1/2" MPT

This is the perfect fittings to get from 1 fitting to 2 ends of your system. Set up in 3 holes using 1/2" MPT

Quick Disconnects

Attach these to your kettles, hoses and fermenters to swap between set-ups quickly and efficiently.

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...