Faucet Wrench and Beer Tower Tool, Deluxe

This wrench allows easy removal and replacement of your faucet from a tower system or standard beer shank. The other sides allows for removal of nut on shank inside tower and most beer nuts for fridge kits and other applications where beer nut is used...

Standard Faucets Parts

Here is our complete parts list for Taprite faucets AND these fit standard faucets too (such as Krome brand)! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any...

Stout Faucet Parts

With us you are able to order any Part for our SS stout faucet you need. Some parts are special order and my take up to a week to get in these parts include: #1 Stop nut #2 Lever #8 Piston #9 Piston Set Screw "Dowel...

Perlick 600 Parts

Parts List for Perlick 600 Series Faucets WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6),  which is known to the state of California to cause cancer, birth defects and other reproductive...

Perlick 525 Parts

Here is our complete parts list for Perlick's 525ss Forward Sealing Faucets! The first numbers, listed below, correlate directly to the numbers shown on the above schematic. Please call us @ 325-356-5204 if you have any questions!#2 - O-ring, top of...

Picnic Tap 2.0

Picnic Tap 2.0. This Tap is designed to dispense beer directly from a ball lock keg. It has a flow control mechanism that greatly reduces the foam seen in many other types of systems that connect directly. We have used this tap and it provides much...

Perlick Growler Filler

This growler filler only fits 600 series Perlick faucets!

Stainless Steel Domed False Bottom 12″

The Domed 12″ False Bottom covers the entire bottom of a 10 gallon mash tun or hot liquor tank which makes for sparging and draining much easier and faster. BUT, be warned because the 12" false bottom is a tight fit and may scratch the side of your...

AEB Ball Lock Post

These post are Italian made post from the company AEB.

Plastic Post Insert

****NOTE, MUST BE FITTED!!! This part rarely fits as it comes due to variations in construction over the years. They are normally too tall. We have to fit them to the keg we are replacing them on and you will need to do this as well. We sand them down...

Regulator Guage Boot

These are regulator gauge boot(s)for a Taprite regulator. You will need to order two for a two gauge regulator (or more for multiple gauge regulators. These really help protect your regulator, but not as well as the cage. People with 3 or more gauges...

Regulator Guage Cage

This regulator guage cage is heavy guage metal with a black powder coat finish and comes with a bolt to attach it to your Taprite regulator. This will only fit a taprite regulator. Provides extremely good protection for the...