Plug, 1/4" MPT (Male Pipe Thread)

This 1/4" MPT (Male Pipe Thread) plug is great to use on any brass or aluminum port to seal air flow.  We use the on our regulators and air distributors.  When using with aluminum we find you sometimes need Teflon tape and  a pipe thread...

Blank WYE

Blank WYE with 1/4" NPT Male Inlet with two Female 1/4" NPT outlets.  This can be used for CO2 distribution on a regulator.  We add Teflon tape to the threads so you can get a good seal when installing. Important information regarding Prop. 65...

1/4x1/4 Nipple, 2 1/2" Long

This 2 1/2" nipple is 1/4" X 1/4" NPT right hand thread (National Pipe Thread) and is used for connecting regulator bodies together. These nipples are thick, with wrench flats for easy installation and durability.  We use them for secondary Taprite,...

Nipple 1/4" MPT X 1/4 MPT

This nipple is 1/4" MPT X 17" MPT (Male Pipe Thread).  This is often used to attach two air manifolds together or for other applications where you need to join two Female 1/4 FPT parts together.  It is one inch long.   Important...

Nipple Left hand thread X Left hand threads, Hex 1 7/8" Long

Hex Nipple 2" long, Left hand threads on both sides. Used to join Taprite Regulator Bodies together. WARNING: This product can expose you to lead,  which is known to the state of California to cause cancer, birth defects and other...

Nipple and Nut to fit European and Asian CO2 Cylinders (Read Description)

Nipple and Nut to Fit European, many Asian and some other countries This will NOT fit American style CO2 cylinders (CGA320) ∙ Stem conforms to DIN 477 No.6 and BS 341 No.8  ∙ Thread is 21.8 mm – 14 (metric)  ∙ Hex size is 30...

1/4" MPT X 1/4" MPT Coupler

This brass coupler is 1/4" Female Pipe Thread (FPT) x 1/4" FPT  They can be used to put together any 1/4" Male Pipe Thread (MPT) fitting of brass, plastic or Stainless Steel.     Important information regarding Prop. 65 for California...

Nipple and Nut to fit Korean and some Asian CO2 Cylinders (Read Description)

Nipple and Nut to fit Korean and some Asian CO2 Cylinders Nipple fits Taprite and other Left Hand (high pressure side) primary beer and soda regulators THIS WILL NOT FIT AMERICAN STYLE (CGA320) CO2 Cylinders!  Thread is .780-14 (special...

Nipple and Nut set to fit Russian CO2 Cylinder, Fits Taprite and other LH thread Regulators (Read Description)

Nipple and Nut to Fit Russian (and other former Eastern Block Nations...maybe some others) This will NOT fit American Style CO2 cylinders (CGA320) ∙ thread is G3/4-BPS  ∙ No seal, requires washer, 763RUS  ∙ Hex size is 1-⅜ ∙ This nipple is...

4 Faucet Fridge Flow Control Kit

Kegconnection is very excited to introduce this four faucet kegging kit that include CMBecker Flow control faucets, like the X1 Flow Control Faucet and the stainless steel V10 Flow Control Faucet. We pride ourselves on offering only the...

3 Faucet Fridge Flow Control Kit

Kegconnection is very excited to introduce this three faucet kegging kit that include CMBecker Flow control faucets, like the X1 Flow Control Faucet and the stainless steel V10 Flow Control Faucet. We pride ourselves on offering only the...

2 Faucet Fridge Flow Control Kit

Kegconnection is very excited to introduce this two faucet kegging kit that include CMBecker Flow control faucets, like the X1 Flow Control Faucet and the stainless steel V10 Flow Control Faucet. We pride ourselves on offering only the...