BlowTie Spunding Valve w/ Built-In Gauge & CMB Disconnect

This Duotight spunding valve is perfect for pressure fermenting and other situations where you need to maintain a certain pressure with gas coming in. It will relieve pressure on a fermentor and keep it at a constant pressure like 10PSI (PSI commonly...

BlowTie Spunding Valve w/ External Gauge & CMB Disconnect, Complete Kit

This Duotight spunding valve is perfect for pressure fermenting and other situations where you need to maintain a certain pressure with gas coming in. It will relieve pressure on a fermentor and keep it at a constant pressure like 10PSI (PSI commonly...

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,

6' High Pressure Hose Assembly with CGA320 CO2 Female x 1/2" FFL with 1/4" MPT, Set up for Right Hand Threaded Regulators,   One side connects directly to the tank, the other side has female MFL to connect to male 1/4' MFL.

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 9.5 mm (3/8 in.) Male Elbow

This Duotight fitting features a 9.5mm male fitting on one end and a female fitting on the other end. The female end can be used with EVABarrier 9.5mm hose and the male end can plug directly into Duotight fittings. Duotight fittings feature a dual oring...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve

This Duotight fitting attaches to 9.5mm hose on one side and has 1/2" threaded BSP thread on the other side. NOTE....this is 1/4" BSP thread, not 1/2" NPT! Duotight fittings feature a dual oring design that give  you a better, more reliable seal...

Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer

This Duotight reducer is specifically designed to go from 8mm hose to a 1/4" Duotight barb. An example of this would be the barb on a Intertap tower shank, but most people would use 8mm line for beer unless it is a long run. Keep the following in mind...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Joiner

This Duotight fitting is for joining two pieces 9.5mm of EVABarrier hose together.  Duotight fittings feature a dual oring design that give  you a better, more reliable seal. Keep the following in mind when using Duotight...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Check Valve

This Duotight is great when you need an inline check valve. It is in 9.5mm which is the most common size used for gas with Duotight fittings and EVABarrier 6.3mmx9.5mm hose. Why do you need an inline check valve? This only allows gas to flow only one way...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/2 in. BSP

This Duotight fitting allows  you to connect a 9.5mm hose or 3/8 line to 1/2 BSP thread. Please note that this is BSP not NPT thread. You might get it to work and seal with NPT because it is plastic, but be aware. Duotight fittings feature a dual...

Duotight Push-In Fitting - 8 mm (5/16 in.) x 9.5 mm (3/8 in.) Reducer

This fitting allows you to reduce a 9.5mm line to a 8mm line or vice versa.  Duotight fittings feature a dual oring design that give  you a better, more reliable seal. Keep the following in mind when using Duotight fittings: You need to...

Duotight Push-In Fitting - 9.5 mm (3/8 in.) x Female Beer Thread

This fitting allows you to connect to a standard beer shank or beer coupler. The 9.5mm size would normally be used with gas, however it can be used with Flow Control faucets like CMBecker when less restriction is desired. This can be used in your Keezer...

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

This Duotight fitting is for joining two pieces of EVABarrier hose or rigid tubing together.  Duotight fittings feature a dual oring design that give  you a better, more reliable seal. Keep the following in mind when using Duotight...