Sanke Tap to Homebrew Conversion Kit, Ball Lock Disconects

(2 reviews) Write a Review

This kit includes two 1/4MFL tailpieces, a liquid and gas MFL disconnect, a 5/16 and 1/4 barbed swivel nut set (for connecting lines to Converted Sanke and disconnects on gas and beer lines) and two stainless worm clamps. To use this kit take beer and gas line off of your existing Sanke tap. Remove the tailpieces you removed line from and replace with the 1/4 MFL tailpieces in kit. Put 5/16 Swivel nut on your gas line and 1/4 on your beer line (for 3/16 line dip line in boiling water for 30 sec and it will slip on easily) then tighten down with worm clamps. You can now go between the Sanke tap and homebrew disconnects by unscrewing swivel nuts and screwing back on the connection you need. See Video on making this conversion at:

WARNING: This product can expose you to hexavalent chromium, also known as chromium 6 (Cr6),  which is known to the state of California to cause cancer, birth defects and other reproductive harm. For more information go to:


Videos Hide Videos Show Videos

2 Reviews Hide Reviews Show Reviews

  • 4
    Works great!

    Posted by Chris on 24th May 2016

    I had absolutely no issues with assembly or application.

  • 4
    Worked perfectly...

    Posted by Will on 3rd Jun 2015

    Got it very quickly, all parts were there and it worked exactly as advertised.

    Had to call to figure out what one of the washers was for so it could have a slightly better install guide. Otherwise, it's perfect.