Product Description
This is a re-conditioned 5 Gallon Pin Lock, Soda Keg (Coke style). This keg has been cleaned and soaked in a hot "Brew Clean" solution, re-rinsed, lubed and re-pressurized to check the seals. The kegs are in good shape, but could have small dings, dents or scratches. The lid features a gasket seal and a static pressure release valve. These will not effect the function of the kegs. Many have stickers on the outside. They might be of either Cornelius, Firestone (also called Spartenburg) or Italian construction. All types of kegs are manufactured to the same specifications and are of the same quality. The lids and O-rings are interchangeable. We fully guarantee your satisfaction with the kegs you purchase. ***FREE O-RING PROMOTION: 1 LID, 2 POST AND 2 DIPTUBE O-RINGS FREE WITH YOUR ORDER!***
- Many people prefer pin lock kegs when using in shorter Fridge or areas where height is important. They 22" tall and 9" Wide.
Please remember that these are used kegs. They will have dings, dents, stickers on the outside and could have some permanent staining that will not effect your beer. If you want a perfect keg we sell new kegs as well.
Again - these are used kegs and are returnable but you will pay the shipping to return them.
Have a pin lock keg lid needing a pressure depressor? BUY ONE HERE
Product Videos
Custom Field
Product Reviews
108 Reviews Hide Reviews Show Reviews
-
Nice Corny for the Price
Nice clean keg; for the price it cannot be beat. Looking forward to many great beers out of this unit.
-
Great deal for the price and reasonable shipping charge
The kegs came in very good condition and required little cleanup to get ready for filling with beer. Some bargain kegs can require a lot of elbow grease to get ready. I just soaked mine with some dishwasher detergent solution, rinsed and filled with iodine solution. Great job Keg Connection!
-
keg in great condition at an unbeatable price!
Bought 4 kegs great condition and CLEAN! For less than 40 dlls each. Can't find a better price
-
Good for the money
I got 2 kegs, because the shipping can't be beat. Keg #1 had good seals. Keg #2 had a bent tube and the rubber seals are deteriorating. I have the supplied extra seals kit, so no big deal as long as the dip tube is still serviceable even though it is bent at the top. I will pressure test before I fill. Inside of both kegs looked great. I will purchase again without reservation.
-
Good Product, Fast Delivery
I ordered 2 pin lock kegs, they arrived in less than a week and came with new O-ring sets for both, valve depressor and a free pack of keg cleaner. Their price is the best I found and I couldn't ask for better service. My only regret is not getting 4 kegs.
-
Mostly in good shape, missing a release valve pin
The keg came in great shape, all of the seals had been replaced and the keg had been thoroughly cleaned. The only thing I had to do was put a new release valve pin on.
-
Great quality...
I've bought now 12 of these from Keg Connection over the past year. Only had one that gave me any problem when trying to remove the dispensing post. Emailed KegConnection and told them the issue and said I was thinking of trying a pipe on my wrench to get more torque but was afraid I might break it. They told me to go ahead and if something went wrong they'd replace it. Ended up popping right off at that point, no problems at all. All the other kegs have been fine, hold pressure great.
-
Good clean keg
Keg is in great condition and even comes with an additional full set of seals. Very satisfied!
-
Exceeded expectations
The keg arrived timely, in excellent working condition. Very clean on the inside. Normal to have some cosmetic scrapes and minor dents. Top Handle and Bottom Base secure - no problems. Not for brew in my case. I'm using the corny keg as a liquid water/soap solution sprayer. Drilled a hole in the lid and installed a tire inflation valve to pressurize with air compressor. Perfect, that's to Keg Connection.
